Wireless GPRS-GPS Tracking & Data systems

Introduction

The AM120 is a STATE OF THE ART, quad band GPRS on-line Track & Trace unit,
Typical applications include AVL,Telemetry, Security Systems, Data Loggers, or any remote equipment with serial data port.

Main Features

• A State-of-the-art track & trace device for stand-alone applications.
• Successor and replacement for the M110
• With M110 compatible report format
• Based on experience and the newest technologie
• No PDA or laptop needed.
• Embedded messaging possibilities Terminal - AM120 <> Remote server
• Fixed baud rate configurable to match terminal equipment speed.
• NMEA signal can be used on a PDA for in-car navigation
• Remote controlled from the server over the GPRS network
• Flexible Configuration & Operation
• Configurable host IP address.
• Data transfer by UDP or TCP.
• Auto reconnect after connection drop.
• Standard Hands Free Voice Prepared
  
• Embedded rechargable backup Battery (1.7Ah/3.6V Li-Ion)
• Report logging up to 12000 Reports
• Enclosure size 132 mm x 65 mm x 26 mm (L x W x H)
• RoHS compliant (green)
• Operating temperatur range: -20 to +60 Deg C
• Approvals : E, CE, FCC

Inside the AM120

• Motorola G24 quad band module (class-B, Multy-slot class 10)
• Navman Jupiter 20S (high sensitivity)
• Sensitive Accelerometer (X/Y dimension)
• 8 Processor evalutated and controlled LED’s (Charge, Power, GPRS, Network, Report, Alarm, 1PPS, Add-On)
• Operating voltage 12-42V, load dump protected
• Integrated I-Button interface (unique driver identification)
• Battery Charger & Power Management
• Ultra Low Power Processor. Estimated Average Power Consumption (4xD-cells):
1.4 Ah / Year when operating in Sleep mode (MSP monitors the sensor inputs and modem is only active when required - user defined).
• Six high voltage protected inputs
• All inputs are fully automotive protected
• 1 Ignition input - Supports / Generates low power mode
• 1 digital counter input
• 4 digital (12V) and/or analog (0-3V, 12 bits resolution) inputs
• Two Opto-Isolated Steady State Relay Outputs (50V/800mA)
• Six independent serial communication channels (3 external and 3 internal)
• Expansion Slot (Bluetooth, RFID, etc.)
• Hardware Boot Switch
• SIM Card Holder

Connecting the AM120

• SMA antenna connectors (GSM & active 3.3V GPS)
• Adjustable microphone signal conditioned standard input
• Adjustable Class-D Audio Power Amplifier output (max 1.4W @ 4 Ohm)
• Robust All-In-One Connector – 12 Pins
• Inputs: Ignition, Counter, 4 digital/analogue
• Outputs: Dual Pole Optical Steady State Relays (50V / 800mA)
• Power: main supply 12/24/42V systems, direct additional battery In/Out
• COM1 & COM2 - DB9: full duplex RS232, RTS/CTS, 1.2-115k bps
• COM3 - RJ45:
• full duplex RS232, 1.2-57.6 bps
• iButton - One wire
• direct NMEA (9600 bps)
• Smooth connection to WMCS DT120 data terminal
• Reset - Active high

Functionality of the AM120

• GPRS based Tracking & Tracing
• TCP or UDP socket for main server
• Separate UDP socket for logging or back-up server
• Separate UDP socket for over-the-air firmware updates
• Ping Controls
• Taylored report format definition (such as: verbose, terse, Id's, GPS extractions, digital/analog input status, output status, accelerometer, i-button, user specific report field)
• Adjustable Time-Scheduled report with full status, coordinates, sensor status, and control outputs
• Adjustable Elapsed Distance report (example: every 10 km a full status report is send to Remote server)
• Flexible awake /sleep conditions )
• Extensive alarming system (like: ignition, start/stop, geo-fencing, input triggers, motion sensor, counter, low battery)
• Geo fencing (up to 8 fences - entering or leaving)
• Text messages from attached terminal to server or from server to attached terminal
• Pseudo transparancy to all external com ports
• Report / Alarm storage in case of no GPRS coverage, main server down, or during Voice call
• Remote commands to adjust user settings and output controls
• Emengency SMS-based remote command support

Windows AM120_TT User Program for configurating and re-flashing the AM120

• Terminal interface
• Unit programming interface
• User settings control console interface

Other free software

• Over-the-air Remote programmer
• Demo TCP server
• Demo UDP server